Job Sheet-19M1320D_F1704-S3.wnc

Path : D:\sejong\model\2025\19M1320D_SU\251203\1704\ Geometry : 19M1320D_F1704_Z_251103.x_t.wnc P/G : M04960 Dec07.htm X_Min : -612.500,          X_Set_A :   -617.500 Y_Max : 115.750,          Y_Set_A :   120.750 Z_Max : 229.818 X_Max : 612.500,          X_Set_A :   617.500 Y_Min : -115.750,          Y_Set_A :   -120.750 Z_Min : -0.003 X_Center : 0.000 Y_Center : 0.000 X_Length 1225.00 Y_Length 231.50 Z_Length 229.82

.. ===> :Z_Min = 0.00,,,,,,,,,,Z_Min: : -0.00

---MC960 -19M1320D_F1704-S3.wnc Dec07.jpg---- , Programmer's Comment : 4H, ¨ù??¢´

NCD	Toolpath Type							Zmin (R_cen)	Stock	Krpm	Time
X TOUCH
O4501	Optimized Planar Finishing	11		20.96	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	32.40	131.23	0.00	3.6	00:00
O4502	Optimized Planar Finishing	11		20.96	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	28.40	135.85	0.00	3.6	00:00
Y TOUCH
O4503	Optimized Planar Finishing	11		20.96	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	33.10	130.66	0.00	3.6	00:00
O4504	Optimized Planar Finishing	11		20.96	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	40.60	123.01	0.00	3.6	00:00
-
O4505	Global Rough/Rerough	3		26.00	2.00	R:2.00 , A03-BT50_C32-135-SRS	108.70	98.22	0.50	2.0	01:03
O4506	Flat Surface Finishing	3		26.00	2.00	R:2.00 , A03-BT50_C32-135-SRS	107.30	99.08	(W) 0.60 (E) 0.40	2.0	00:00
O4507	Global Rough/Rerough	5		17.00	2.00	R:2.00 , B02-BT50_SSF16S_238-SRS	96.10	69.18	0.50	2.6	00:11
O4508	Flat Surface Finishing	5		17.00	2.00	R:2.00 , B02-BT50_SSF16S_238-SRS	97.00	68.68	(W) 0.60 (E) 0.00	2.6	00:00
-
O4509	Z-Level Finishing	10		21.00	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	69.00	96.62	0.30	3.6	00:29
O4510	Flat Surface Finishing	10		21.00	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	68.10	98.88	(W) 0.40 (E) 0.20	3.6	00:00
O4511	Z-Level Finishing	10		21.00	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	99.00	69.03	0.30	3.6	00:16
O4512	Flat Surface Finishing	10		21.00	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	98.10	68.88	(W) 0.40 (E) 0.20	3.6	00:00
-
O4513	Z-Level Finishing	10		21.00	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	69.20	96.42	0.10	3.6	00:20
O4514	Flat Surface Finishing	10		21.00	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	68.60	98.73	(W) 0.20 (E) 0.05	3.6	00:01
O4515	Z-Level Finishing	10		21.00	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	99.20	68.82	0.10	3.6	00:11
O4516	Flat Surface Finishing	10		21.00	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	98.70	68.73	(W) 0.20 (E) 0.05	3.6	00:00
-
O4517	Z-Level Finishing	11		20.96	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	69.30	95.92	0.00	3.6	00:19
O4518	Flat Surface Finishing	11		20.96	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	69.10	98.68	(W) 0.10 (E) 0.00	3.6	00:00
O4519	Z-Level Finishing	11		20.96	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	99.30	68.72	0.00	3.6	00:11
O4520	Flat Surface Finishing	11		20.96	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	99.10	68.68	(W) 0.10 (E) 0.00	3.6	00:00
O4521	Z-Level Finishing	11		20.96	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	99.30	68.72	0.00	3.6	00:11
O4522	Flat Surface Finishing	11		20.96	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	99.10	68.68	(W) 0.10 (E) 0.00	3.6	00:00
-
	Manual Hole Machining			20.96	1.00	R:1.00 ,			0.00	3.6
	Centering	24		10.00		R:0.00 , T02-BT50_Slim-Chuck-155-SRS	98.90	66.88	0.00	1.6	00:00
	Drilling	33		7.10		R:0.00 , T01-BT50_Drill-Chuck-130-SRS	122.00	43.75	0.00	0.7	00:02
	Centering	23		16.00		R:0.00 , A04-BT50_C20-150-SRS	99.40	66.38	0.00	2.3	00:00
	Tapping	22		8.00		R:0.00 , T03-BT50_Tap-Chuck-SRS	119.10	46.68	0.00	0.1	00:00

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 23.1 23.2 23.3 23.4, Selected : 507713.31mm	Total Time : 03:25

(Each-PP) : 54_G154 ¡Ù¡Ù [ VM960 ] ¡Ù¡Ù ,   Saved File Name : M04960 1Dec07.htm, Save time : 15:15:50 , Saved Counter : 1

Concatenated Postprocessor
No.	CC_NCD	Postprocessor	Toolpath List:	Length: Total	Time: Total
1	O0401	54_G154==[ Drill / Tap ]==	23.1 23.2 23.3 23.4	176.00	00:00

---Sort By Tool_NO---

Se Jong Precision Machinery Co. LTD, Tel : 031 666 1325, Fax : 031 666 1327

---EnLarge Image---